Union, connector set, low pressure, 0.8 mm / 0.031 inch through hole with 1/4-28 screw threads. PEEK, straight line. Complete with PEEK nuts and ETFE ferrules. ARE-Applied Research brand. 5/PK.
Additional Info:
This all-PEEK set of one union and two finger tight fittings, with separate ETFE ferrules and standard pilot lengths, allows you to connect two pieces of low pressure, 1/16th tubing in a straight line.
Maximum Temperature: 100°C
Maximum Pressure: 1,000 psig.
Click HERE for economical pack of 10.
The "flat" sections on the union and the nuts allows the use of wrenches for an extra 1/8 of clockwise turn for tighter sealing or a slight counterclockwise turn to help remove if a tight fitting is too hard for hand removal.
Note: Click HERE for key differences between high and low pressure unions and adapters.